Audio Pro STEREO TWO Operations Instructions Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
INSTALLATION
Using the remote control
Insert the AAA batteries included in the packaging
into the battery opening on the back of the remote
control. Make sure that the polarities (+ and -) are
aligned correctly.
The remote control’s operating range
(approximate)
Note that the remote control’s power button only
works if the power switch on the back of the head
unit is in the ON position and the LED on the front
of the panel is red. Weak batteries will affect the
range of the remote control.
Setting of the clock
When this unit is used for the first time, or if it has
been turned off by the main power switch, or if
there has been a power outage, no time will appear
in the display.
Note: Clock setting can only be made in Standby
mode. Make sure the unit is in Standby mode
before setting the clock.
1) Press MENU. SET is indicated in the display.
2) Adjust the correct hour using the TONE/SKIP
knob.
3) Press MENU again and adjust the correct
minutes using the TONE/SKIP knob
4) Press MENU and the display confirms DONE.
Setting the clock is also possible from the remote
control. Then use MENU and PRESET buttons.
The clock can also be set automatically when a
radio station with RDS/CT is tuned.
Connecting the FM indoor antenna
Connect the FM indoor antenna plug to the output on
the back panel.
Locate the other end where the reception is good.
Connect a central or outdoor antenna here too.
Connecting the AM antenna
Connect the AM antenna wires according to the figure
below.
Place the ring as far from the unit, TV, and power cables
as possible. Adjust the placement of the ring for the
best possible reception.
Connecting an external audio source
Connect an external audio source with RCA plugs to
AUX 1-3 on the back panel or with a 3.5 mm [1/8 inch]
plug to LINE IN on the front panel. Select the respective
audio source with SOURCE on the front panel or INPUT
on the remote control.
AUX IN on the back panel LINE IN on the front



Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments